The wall everyone looks at, done properly.
Slatted or panelled TV walls with LED lighting, floating units and electric fires. Built to your room and fitted by us, with the cables hidden rather than boxed in.
- Built around your TV
- LED lighting
- Cables hidden



Three ways to do a media wall.
Every wall is planned around your TV and your room. Start with one of these and we’ll tweak it on the visit.
- Acoustic slat panels
- TV panel sized to your TV
- Floating unit with electric fire
- LED lighting
- TV bracket and hidden cables
- TV panel sized to your TV
- Floating unit, with or without a fire
- LED behind the panel
- TV bracket and hidden cables
- Acoustic slat panels
- TV panel sized to your TV
- LED lighting
- TV bracket and hidden cables
Try the slats, finish and lighting.
Pick a slat colour, a panel finish and your LEDs, and see how it comes together. The LED strips sit out of sight, so you see the glow, not the lights.
Six finishes for the panel and unit.
The TV panel and the floating unit come in the same finish, so everything matches. The panel is sized to your TV, with roughly 200mm showing either side.






Slats, light to dark.
Felt-backed acoustic slats either side of the TV. They add warmth and depth, and take the echo out of the room. We fit as many as your wall needs.








Storage underneath, flames on demand.
Wall-hung units that leave the floor clear, with or without a built-in electric fire. The fire plugs into an ordinary socket — no chimney, flue or gas.






What size do you need?
A rough guide — we measure your wall and your TV on the visit and plan it properly.
| Your TV | Floating unit | Fire |
|---|---|---|
| Up to 69" | 2m unit (418mm high, 375mm deep) or a 1.8m unit without a fire | 42" |
| 75" to 85" | 2.4m unit (418mm high, 375mm deep) | 60" |
| Any size | TV panel made to your TV plus about 200mm either side. Slats fill the rest of the wall. | |
Questions we get asked.
Can you build one on any wall?
Most walls, yes. We check what the wall’s made of on the visit and fix everything to suit — stud walls get the right fixings so the TV and unit are solid.
Where do the cables go?
Behind the TV panel and down inside the unit, so there’s nothing hanging down the wall. Your boxes and consoles can live in the unit.
Do I need a new socket behind the TV?
Not always — the fire and lights run off normal plugs. If you want sockets added or moved behind the panel, that’s done by a qualified electrician.
Can I have the flames without the heat?
Yes. The flame effect runs on its own, and the heater has full and half power settings for when you want it.
Can I mix the slats and panel finishes?
Yes — oak or walnut slats with a marble or concrete panel is one of the most popular looks. We bring samples so you can see them together.
Three steps. One team.
- 01We measure upWe come out, measure the wall and your TV, and plan the slats, panel, unit, fire and lighting with you. We bring samples of the finishes.
- 02Made to your wallThe panel, slats and unit are made to the sizes we’ve planned, with the TV panel sized to your TV.
- 03We fit itWe fit everything, wire in the LEDs, hang the TV and hide the cables. Any new sockets are done by a qualified electrician.
Get your media wall priced
We’ll measure up, bring the finish samples and give you a written price. Free, and no obligation at the end of it.
Or call 01254 449296
